Tascam MD-CD1 CD Player User Manual


 
10 – MiniDisc editing—Combine tracks
TASCAM MD-CD1
Owner’s Manual
43
Combine tracks
Two successive tracks can be combined into one
track by deleting the track mark of the second track.
Example: To combine B and C
NOTE
Successive tracks recorded with different recording
modes cannot be combined into a single track.
1
Put the deck in play or in playback standby
on the second of the two tracks to be com-
bined.
For example, if tracks 2 and 3 are to be com-
bined, play track 3 or put it in playback
standby mode.
2
Select the “COMBINE?” option on the EDIT
sub-menu of the MD menu.
“Track OK?” is displayed, and a 3-second
segment from the end of the rst track and a
3-second segment from the start of the sec-
ond track are successively played back
repeatedly to enable conrmation.
3
Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
After the tracks are combined, “Complete” is
shown on the display.
NOTE
If both tracks have titles, the combined track will take
the title of the first of the two tracks.
Move tracks
Tracks can be moved to different positions in the
playing order.
Example: To move D from track number 4 to
track number 2
1
Put the deck in play or in playback standby
on the track to be moved.
NOTE
If the above step is not performed first, and the follow-
ing operations are performed while the deck is in stop
mode, the last track will automatically be selected as
the track to be moved.
2
Select the “MOVE?” option on the EDIT
sub-menu of the MD menu.
“Move ***>### “ is displayed, with *** rep-
resenting the number of the track to be
moved, and ### representing the track num-
ber where it will be moved.
3
Use the MULTI JOG dial on the front panel,
or the MENU -/+ key on the remote control
to select the track number where it will be
moved.
4
Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
“Sure?” is displayed.
5
Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
After the track is moved, “Complete” is
shown on the display.
2ReMD-CD1.fm 43 ページ 2004年11月5日 金曜日 午前7時35分