Filter
Top Products
4 – Features and their functions—Rear Panel
TASCAM MD-CD1
Owner’s Manual
15
z
DISC, GROUP, TRACK display
DISC
lights up when the display master deck has a disc
loaded and is stopped.
GROUP lights up when the display master is the CD
deck and the Directory mode is on, or when the dis-
play master is the MD deck and the group mode is
on.
TRACK is indicated during playback or playback
standby.
1
Character display
Disc information, track
information, menu, message and operation status are
displayed.
2
This lights when the Timer Play function is
on.
3
CAPS,
These light during title input
to indicate either CAPS or Japanese character mode.
In lower case letter mode, there is no indication.
4
EOM
This lights when the remaining track/
disc time is less than the EOM set value.
Rear Panel
5
ANALOG INPUT MD Terminals
The
analog line input terminals for the MD deck are for
RCA pin jacks. Rated input level is –10 dBV.
6
ANALOG OUTPUTS – CD – COMMON
– MD Terminals
The analog line output terminals
are for RCA pin jacks. Rated output level is –10 dBV.
CD: Outputs the CD deck signal.
COMMON: Outputs CD and MD signals. During
playback of both decks, the output signal depends on
the “COMMON?” option setting on the SYSTEM
menu.
MD: Outputs the MD deck signal. During playback,
the playback signal is output; during input monitor-
ing, the source signal is output.
7
DIGITAL (OPTICAL) INPUT Terminal
This is the digital input terminal for the MD deck.
8
DIGITAL (OPTICAL) OUTPUTS – MD
– CD Terminals
These are the digital output ter-
minals (optical). The playback signals from the MD
deck and the CD deck are output through their
respective digital output terminals.
9
CONTROL I/O (RS-232C) Connector
RS-232C compatible serial control from an external
PC can be performed.
HJ KL
:
2ReMD-CD1.fm 15 ページ ２００４年１１月５日 金曜日 午前７時３５分