Filter
Top Products
24
TASCAM MD-CD1
Owner’s Manual
7 – CD and MD Playback
The MD-CD1 can play both CDs and MDs. Basic
playback and the operation of most playback func-
tions are virtually identical for the CD and MD
decks. This section will explain the shared playback
functions first, followed by playback functions for
CD only, MP3 disc directory playback, and MD
group playback.
Discs for playback
The CD and MD decks in the MD-CD1 can play
back the types of discs listed below.
CD deck
Ordinary audio CDs available commercially
(recorded in CD-DA format)
CD-R and CD-RW discs recorded in CD-DA format,
and properly finalized
MP3 files recorded in ISO9660 format on CD-R and
CD-RW discs, and properly finalized
.
MD deck
Audio MiniDiscs recorded in standard, LP2, LP4 and
mono modes.
Playback modes
There are four different playback modes for both the
CD deck and the MD deck. The mode selected is
indicated on the display.
Normal (continuous) playback mode: no indication
lamp
Single playback mode: SINGLE is lit
Program playback mode: PROGRAM red lamp is lit
Random playback mode: RANDOM red lamp is lit
The playback mode can be selected using the
P.MODE key on the remote control. Pressing the key
changes the playback mode in the following order:
Cont
→
Single
→
Program
→
Random
You can also select the playback mode using the
"PLAY MODE?" option in the PLAY sub-menu of
the CD and MD menus.
While the mode can be changed from any playback
mode, the explanation in this manual will assume the
user is starting from the normal Continuous mode.
Basic playback operation
1
Push the POWER switch to turn on the unit.
The display will indicate NO DISC.
2
Insert a disc.
CD:
2-1
Press the OPEN/CLOSE key, and the CD
tray opens.
2-2
Place the CD in the tray, label side up.
2-3
Press the OPEN/CLOSE key again, and the
CD tray closes.
NOTE
For 2-3, instead of the OPEN/CLOSE key, if the PLAY key
is pressed, the CD tray will close and playback will
begin, and if the READY key is pressed, the CD tray will
close and the unit will enter playback standby mode.
After a disc is inserted, the total playing time
and number of tracks will be displayed.
MD:
2-1
Insert the MiniDisc into the MD slot, in the
direction of the arrow, and with the label side
up.
After a disc is inserted, the disc title (if there
is one), and the total playing time and num-
ber of tracks will be displayed.
3
Press the PLAY key.
The indication will light up, and play-
back begins from track 1. The number of the
current track in play is indicated on the dis-
play.
To stop playback, press the STOP key.
To pause playback, press the READY key.
The indication will light up, and the unit
will enter playback standby mode. To resume
playback, press the PLAY key.
2ReMD-CD1.fm 24 ページ ２００４年１１月５日 金曜日 午前７時３５分