T+A Elektroakustik K1 AV Stereo Receiver User Manual


 
Specification
Amplifier section
External sound inputs 3 TV (via SCART)
TAPE
AUX
1 V / 20 kΩ
1 V / 20 kΩ
350mV....1V / 20 kΩ variable
Sound outputs
(line-level)
2 TV (via SCART)
TAPE
1 V / 150 Ω
1 V / 150 Ω
Headphone output 1 for headphones > 30 Ω 1 V / 150 Ω
Sub-wooferoutput 1 For active sub-woofer 1 V / 50 Ω
Output stages, room A 3 Left / Right / Centre 3x 60 / 100 Watts
(continuous / music power, 4 Ω)
Output stages, room B 2 Left / Right 2x 20 / 30 Watts
(continuous / music power, 4 Ω)
Total harmonic distortion < 0,02 %
Frequency response 2 Hz .... 150 kHz
Damping factor > 400
Operating modes,
Sound formats
Stereo
3-channel music
3-channel movie
Dolby Virtual Surround - DVD only
Soundfields - DVD only
Left / Right
Left / Right / Centre
Left / Right / Centre
Via two (L / R) or three (L / C / R)
loudspeaker channels
Bass management,
Cut-off frequencies
Full-range loudspeakers (large)
Full-range loudspeakers (medium)
Satellite loudspeakers
Sub-woofer
Unlimited
60 Hz
100 Hz
40, 60, 100 Hz
Tuner
Reception range FM 87,5 ... 108 MHz
Sensitivity Mono/Stereo 0,9 µV / 33 µV
Overload margin > 110 dB µV
Stereo channel separation > 40 dB
RDS functions Station name, Radiotext, time
56