Filter
Top Products
Video Setup
TV TYPE
This menu contains the options for selecting the TV
norm, which must be set to match your monitor or
television screen.
PAL
Select this setting if the picture output is to be reproduced
on a PAL TV set. At this setting, DVDs in NTSC format
will be converted to the PAL format by the K1 AV.
Multi
At this setting the K1 AV carries out no format
conversion. The output from PAL DVDs is reproduced as
PAL, NTSC DVDs as NTSC.
This setting should only be selected if your television set
is a multi-norm type, i.e. one which automatically
switches between PAL and NTSC modes.
NTSC
Select this setting if the picture output is to be reproduced
on an NTSC television. At this setting, DVDs in PAL
format will be converted to the NTSC format by the
K1 AV.
TV DISPLAY
In this menu you set the picture output of the K1 AV to
match the geometry of your TV set.
Note:
The format which you select must be available on the
disc. If this is not the case, the selected picture format
settings will have no effect on the picture during
playback.
4:3 Pan Scan
This produces a picture of full screen height; if a wide-
screen film is played, the centre of the picture fills the
screen of a 4:3 TV set. Less important areas of the
picture are cropped.
Pan Scan is only supported by a few DVDs
4:3 Letterbox
This option produces a ”wide-screen” reproduction with
black bars at the top and bottom of the picture. In this
setting the entire picture content of the DVD is
reproduced.
We recommend this setting for use with 4:3 televisions.
16:9 (wide-screen)
For reproduction on a wide-screen television (16 : 9
format).
29
Adjustment facility
PROGRESSIVE
TV TYPE
TV DISPLAY
PICTURE SETTING
COMPONENT
PAL
4:3 PAN SCAN
STANDARD
YUV
ON
MULTI
BRIGHT
RGB
NTSC
16:9
SOFT PERSONAL
OFF