Filter
Top Products
Sockets
ANT Aerial input
The K1 AV features a 75 Ω aerial input ANT, which is
suitable both for a normal domestic aerial and for a cable
connection.
‘Trailing wire’ aerials generally produce very limited,
poor-quality reception, and should be used at best as a
temporary solution.
AUX
Universal analogue stereo sound input with variable
sensitivity.
TAPE/VCR
Input / output sockets for connecting a device with
recording and playback facilities (recorder).
If a recording machine is connected, the INPUT sockets
of the recover must be connected to the OUT sockets of
the K1 AV, and the OUTPUT sockets of the recorder to
the IN sockets of the K1 AV.
SUBW
Output sockets for an active sub-woofer.
The sub-woofer is optional.
If you connect a sub-woofer, please select the
appropriate settings in the amplifier menu
(‘SWLEV’) and in the amplifier setup menu
(‘SWCUT’).
:
If a sub-woofer is not present in the system, it is
essential to disable the sub-woofer in the
amplifier setup menu (setting ‘SW OFF’).
If the sub-woofer is not disabled in the amplifier
SETUP menu, the low-frequency sound
components will be absent from the overall sound
for as long as no sub-woofer is connected.
A Loudspeaker terminals *
)
The main pair of loudspeakers is connected to the ¾ A
loudspeaker output. The impedance of each speaker
should be no lower than 4 Ω .
Please set the size of your loudspeakers correctly in the
'Setup Menu'.
• It is very important to ensure that no short-
circuits occur at the speaker terminals as a
result of projecting cable strands or stray
wires.
• If mini-loudspeakers (usually known as
satellites) are used as the main loudspeakers,
a sub-woofer should always be used.
Mains socket
The mains cable supplied with the machine should be
plugged into this socket. The K1 AV is supplied with
mains power through this cable.
DIGITAL OUT
Digital sound output from the disc player, for connection
to external surround decoders or digital recorders.
CENTER
Terminals for connecting a Centre loudspeaker *
The Centre loudspeaker is optional.
If you connect a Centre loudspeaker, please
select the appropriate settings in the Amplifier
Menu (‘C-LEV’) and the Amplifier Setup Menu
(‘CENT’).
:
If there is no Centre speaker in your system, it is
absolutely essential to disable the Centre
loudspeaker in the Amplifier Setup Menu (‘CENT
OFF’ setting).
If the Centre is not disabled in the Amplifier Setup
Menu, the central sound components will be
completely absent from the overall sound as
long as no centre speaker is connected.
42
ANT AUX
R R R
IN OUT
L L L
TAPE / VCR
SUBW
R L
L
R
RC IN
R
LINK
TV
DIGITAL
OUT
RISQUE DE CHOC ELECTRIQUE. NE PAS ENLEVER LES VIS!
SHOCK HAZARD. DO NOT OPEN!
VOR ÖFFNEN DES GERÄTES NETZSTECKER ZIEHEN!
CLASS 1
LASER PRODUCT
A B
CENTER
MADE IN GERMANY.
FABRIQUE EN
ALLEMAGNE.
K1
AV
HERFORD, GERMANY