T+A Elektroakustik K1 AV Stereo Receiver User Manual


 
Approved usage
This device is designed exclusively for reproducing
sound and / or pictures in the domestic environment. It
must be operated in a dry indoor room which meets all
the recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or for any purpose where
safety is an issue, it is essential to establish the unit’s
suitability for this application with the manufacturer, and
to obtain prior written approval for such usage.
equipment which includes a radio or television
receiving section must be operated within the regulations
laid down by the Post Office and the Telecommunications
authorities in the country in which it is used. This unit
may only be used to receive or reproduce those
transmissions which are intended for public consumption.
The reception or reproduction of other transmissions (e.g.
police radio or mobile radio broadcasts) is prohibited.
Device approval and conformity with EU
directives
In its original form, this device fulfils the currently valid
European norms and German technical regulations. It is
approved for use in the EC in accordance with the
relevant regulations.
The machine carries the C symbol, which means that
declares that it conforms with the EU directives
89/336/EWG, modified by 91/263/EWG and 93/68/EWG
and 73/23/EWG, modified by 93/68/EWG and the
national laws derived from these directives.
The original, unmodified factory serial number must be
present on the outside of the machine, and must be
clearly legible. The serial number is part of our conformity
declaration, and therefore of the operational approval for
the machine.
Serial numbers on the machine and in the original
paperwork (especially the quality control and guarantee
certificates) must not be removed or modified, and must
be identical.
Infringement of these regulations invalidates the
conformity approval of , and operation of the
machine within the EU is then prohibited, and punishable
under currently valid EU and national laws.
Any modifications to the machine, or repairs or other
interventions carried out on the machine by persons not
authorised by or other third parties, invalidate the
machine’s approval and operational permit.
The machine may only be connected to original
accessories or such auxiliary equipment which is itself
approved, and which satisfies all currently valid statutory
regulations.
When used in conjunction with auxiliary equipment, or as
part of a system, the unit must only be employed for the
usage stated in the chapter 'Approved usage'.
48