Filter
Top Products
79
GB
D:\NORM'S JOB\SONY HA\SO0126\STR-DN1020\4282218111_GB Web\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Right
STR-DN1020
4-282-218-11(1)
Using Network Features
3 Select “ Settings”, then
press or b.
The Settings menu list appears on the TV
screen.
4 Select “Network”, then press
.
5 Select “Software Update”, then
press .
6 Select “Update”, then press
.
The receiver starts checking the available
software update.
7 When “Found latest update.”
appears, press .
If the update is not available, “No update
required.” appears.
8 Select “OK”, then press .
A message that confirms whether or not
you agree to the terms of the software
update appears. Confirm the message and
also read the “END-USER LICENSE
AGREEMENT FOR SONY
SOFTWARE” (page 130), then press .
9 Select “Agree”, then press .
The receiver starts to update the software.
It may take a while (about 20 minutes at
the longest) for the receiver to finish the
update. The required time will depend on
the amount of data in the updates, the line
type of the network, the network
communication environment, etc.
“Complete!” appears after the software
update is finished.
Press ?/1 to turn off the receiver, and the
receiver is updated to the new version.
To cancel the procedure
Select “Cancel” in step 8.
To go back to the previous
screen
Press RETURN/EXIT O before the receiver
starts the software update.
You cannot go back to the previous screen
when the update starts.
Network features message list
Network settings
Home Network
Message and explanation
Connection Fail
The receiver has failed to connect the network.
Input Error!
The entered values are incorrect or invalid.
Not in Use
An operation that is currently prohibited is being
performed.
Message and explanation
Cannot Connect
The receiver cannot be connected to the selected
server.
Cannot Get Info
The receiver cannot retrieve information on the
server or contents.
Cannot JOIN
The receiver has failed to join a PARTY.
Cannot Play
The receiver cannot play audio files due to an
unsupported file format or playback restrictions.
Cannot START
The receiver has failed to start a PARTY.
Data Error
You tried to play an unplayable file.
Device Full!
You cannot register any more devices to the device
list.
Initialize
The receiver is performing a factory default setting
to Network function.
No Server
There is no server on the network that the receiver
can connect to. Try refreshing the server list
(page 72).
continued