Filter
Top Products
78
GB
D:\NORM'S JOB\SONY HA\SO0126\STR-DN1020\4282218111_GB Web\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Left
STR-DN1020
4-282-218-11(1)
• When you start a PARTY as PARTY host,
you may face a time gap between the audio
output and visual display in the following
cases.
– The Audio Return Channel (ARC) function
is used.
– The video output of the equipment is
connected to the TV and the audio output is
connected to the digital or analog audio
input jacks on the receiver.
• Sources with copyright protection may not be
streamed.
3 Press SHIFT, then hold down
PARTY until “START PARTY”
appears.
The receiver starts PARTY streaming as a
PARTY host.
To close a PARTY
Press SHIFT, then hold down PARTY until
“CLOSE PARTY” appears.
The receiver can join a PARTY that has been
started by another device so that you can enjoy
the same audio content being played in a
different room.
While the PARTY host device is
having a PARTY, press SHIFT, then
press PARTY.
“JOIN PARTY” appears, and the receiver
joins the PARTY as a PARTY guest.
To leave a PARTY
Press SHIFT, then press PARTY.
“LEAVE PARTY” appears, and the receiver
leaves a PARTY.
Tip
If “Network Standby” is set to “On”, the receiver
turns on and joins the PARTY automatically when
the PARTY host device starts the PARTY.
Notes
• You cannot join a PARTY in the following cases:
– you have a PARTY on this receiver.
– you have already joined another PARTY.
• If you press PARTY when no PARTY is started,
but a device complying with PARTY
STREAMING function is playing, the device will
be the PARTY host, and the receiver will join the
PARTY as a PARTY guest.
• The PARTY guest device function automatically
switches to HOME NETWORK when the device
joins a PARTY. Even if the PARTY guest device
leaves the PARTY, the function remains as
HOME NETWORK.
Updating the software
By downloading the latest version of the
software, you can take advantage of the newest
functions. The receiver accesses the Sony
server to update the software.
If a new update is available, “[New Software]
Perform Software Update.” appears on the TV
screen when you are connected to the Internet
and using the Home Network or Music
Services function.
Make sure that other equipment connected to
the receiver is stopped before updating the
software.
For details on software update available, refer
to the customer support site (page 124).
Notes
• Make sure not to turn off the receiver, disconnect
the network cable or perform any operation on the
receiver while the updating operation is in
progress.
• If you try to update the software when the Sleep
Timer is on, the Sleep Timer will turn off
automatically.
1 Press HOME NETWORK to
select the Home Network
function.
2 Press MENU.
The menu is displayed on the TV screen.
Joining a PARTY