Filter
Top Products
57
GB
D:\NORM'S JOB\SONY HA\SO0126\STR-DN1020\4282218111_GB Web\GB04GET_STR-
DN1020-CEL.fm
masterpage: Right
STR-DN1020
4-282-218-11(1)
Tuner Operations
1 Select “ FM” or “ AM” from
the menu, then press or b.
2 Select the preset station you
want.
Preset numbers from 1 to 30 are available.
1 On “ FM” or “ AM” screen,
select the preset number which
you want to name.
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Select “Name Input”, then
press or b.
4 Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing B/b.
5 Repeat step 4 to input a
character one by one, then
press .
The name you entered is registered.
Receiving RDS
broadcasts
(Europe and Australia models only)
This receiver allows you to use Radio Data
System (RDS), which enables radio stations to
send additional information along with the
regular programming signal. This receiver
offers convenient RDS features, such as
Program Service name display. RDS is
available only for FM stations.*
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band.
When you tune to a station that provides RDS
services, “RDS” lights up and the Program
Service name* appears on the TV screen and
the display panel.
* If an RDS broadcast is not received, a Program
Service name will not appear.
Notes
• RDS may not work properly if the station you
tuned to is not transmitting the RDS signal or if the
signal strength is weak.
• Some letters that can be displayed on the TV screen
cannot be displayed on the display panel.
Tip
While a Program Service name is displayed, you can
check the frequency by pressing DISPLAY
repeatedly (page 108).
Tuning to preset stations
Naming preset stations (Name
Input)
FM AM
FM AM