Filter
Top Products
107
GB
D:\NORM'S JOB\SONY HA\SO0126\STR-DN1020\4282218111_GB Web\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Right
STR-DN1020
4-282-218-11(1)
Adjusting Settings
a)
You can only select this parameter after you have performed Auto Calibration.
b)
Depends on the speaker pattern setting, some parameters or settings may not be available.
c)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
d)
You can only select this parameter if “SP PATTERN” is not set to a setting with surround back or front high
speakers (page 37).
e)
You can only adjust the distance in 0.01 meter interval when you have performed the Auto Calibration and
saved the measurement result.
f)
“FEET” for USA and Canada models.
g)
You can only select this parameter if your speaker is set to “SMALL”.
h)
You can only select this parameter if you select “HD-D.C.S.” as sound field.
i)
This parameter is available for the USA and Canada models only. You can only select this parameter if the
SiriusConnect Home tuner is connected to the SIRIUS jack on the receiver.
HDMI settings
[<HDMI>]
Control for HDMI
[CTRL: HDMI]
CTRL ON, CTRL OFF CTRL ON
Pass Through
[PASS THRU]
ON, AUTO, OFF OFF
Audio out
[AUDIO OUT]
AMP, TV+AMP AMP
HDMI input assignment
[H. ASSIGN]
For details, see “HDMI input assign”
(page 87).
System settings
[<SYSTEM>]
Auto standby mode
[AUTO STBY]
STBY ON, STBY OFF STBY ON
Naming inputs
[NAME IN]
For details, see “Naming the input
(Name Input)” (page 48).
Menu
[Display]
Parameters
[Display]
Settings Default
setting
continued