Filter
Top Products
Basic Operations
6
Basic Operations
Playing a CD
2
34
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
PHONE LEVEL
PHONES
MIN MAX
MENU/
NO
YES
CLEAR
PUSH ENTER
REC
AMS
EJECT
OPEN/CLOSE
NORMAL
CD SYNCHRO
HIGH
CLEAR
TIME PLAY MODE DISPLAY INPUT PLAY MODE TIME/CHAR
PUSH ENTER
CD
AMS
REC-IT
STANDBY
MD
1
Turn on the amplifier and set the source selector to the position
for this deck.
2
Press 1/u.
The STANDBY indicator turns off.
3
Press § OPEN/CLOSE to insert a CD. Press the button again
to close the CD tray.
When you play an 8-cm CD, place it on the inner circle of the
tray.
With the label side up
4
Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Connect the headphones.
Adjust the headphone volume.
When using the controls on the
deck
Use the CD player controls located
to the left of the front panel.
When using the remote Z
Set SELECT to CD.
Audio output
Output switches automatically to
the audio of the CD.
z You can start playing with
the track selected in Step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See “Using the Display” on
pages 10 and 11.
Stop playing Press p.
Pause playing Press P. Press the button again or press · to
resume playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the beginning of the
current track or the
preceding track
Turn AMS counterclockwise (or press = on the
remote).
Take out the CD Press § OPEN/CLOSE after stopping playing.