Filter
Top Products
5
Getting Started
Hookups
Connecting the deck to an amplifier
Connect the amplifier to the LINE (ANALOG) IN/
OUT jacks using the audio connecting cords (supplied),
making sure to match the color-coded cords to the
appropriate jacks on the components: red (right) to red
and white (left) to white. Be sure to make connections
firmly to prevent hum and noise.
MXD-D3 Amplifier
ç
Ç
TAPE / MD
L
R
INOUT
LINE
R
L
OUT
IN
(ANALOG)
çç
çç
ç: Signal flow
Connecting the deck to a digital component such as
a CD player, DAT deck, or an MD deck
Connect the component through the DIGITAL
OPTICAL IN connector with the optical cable
(supplied).
Take the caps off the connectors and then insert the
plugs parallelly until they click into place.
Be sure not to bend or tie the optical cable.
MXD-D3 Digital component
DIGITAL
OUT
OPTICAL
Ç
DIGITAL
IN
OPTICAL
çç
çç
ç: Signal flow
z If “Din Unlock” and “C71” alternate in the display
The optical cable is not connected properly. Check that
the connections are secure.
z Automatic conversion of digital sampling rates
during recording
A built-in sampling rate converter automatically
converts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of this deck.
This allows you to record sources such as 32- and 48-
kHz DAT or satellite broadcasts, as well as compact
discs and MDs.
Note
If “Din Unlock” alternates with “C71”, or “Cannot Copy”
flashes in the display, recording through the DIGITAL
OPTICAL IN connector is not possible. In this case, record
the program source through the LINE (ANALOG) IN jacks
with “ANALOG” selected by INPUT.
Setting the voltage selector (Singaporian
model only)
Check that the voltage selector on the rear panel of the
deck is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the AC power cord to an AC outlet.
110–120V220–240V
VOLTAGE
SELECTOR
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.