Filter
Top Products
Playing CDs and MDs
16
Falling Asleep to Music (Sleep
Timer)
You can let the deck turn off after the specified time, so
you can sleep to the music.
You can specify the time until the deck turns off by 30
minutes.
MENU/NO AMS
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
1 Press MENU/NO twice to display “Setup Menu.”
2 Turn AMS to select “Sleep,” then press AMS.
3 Turn AMS to select the time.
The minute display changes as follows:
Off ˜ 30 ˜ 60 ˜ 90 ˜ 120
4 Press AMS.
5 Press MENU/NO.
To change the time to turn off
Start over from Step 1 above.
To cancel the Sleep Timer Function
Start over from Step 1 above, selecting “Off” in Step 3.
z After you activate the Sleep Timer Function
The display dims.
z You can check the time remaining until the deck
turns off
After specifying the time, do Step 1 above and turn
AMS to select “Sleep.” The time remaining appears to
the right of “Sleep” indication.
Changing the Pitch of the MD
(Pitch Control Function)
You can change the MD playback speed (pitch). The
tone rises at higher pitches, and falls at lower pitches.
MENU/NO AMS
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
1 Press MENU/NO twice to display “Setup Menu.”
2 Turn AMS to select “Pitch,” then press AMS.
3 Turn AMS to change the pitch within a range of
–98.5% to +12.5% (in 0.1% steps), then press AMS.
When you press CLEAR, the setting returns to the
initial value (0%).
4 Press MENU/NO.
Notes
• When you change the pitch during playback, the sound
drops out momentarily.
• The pitch setting returns to the initial value (0%) when
you turn off the deck or eject the MD.