Filter
Top Products
Recording on MDs
20
To pause recording
Press P. To resure recording, press the button again or
press ·.
Note
Whenever you pause recording, the track number increases
by one. For example, if you paused recording while
recording on track 4, the track number increases by one and
recording continues on the new track when restarted.
To stop recording
Press p.
z When “Overwrite” flashes in the display in Step 9
above
This indicates that the deck will start recording erasing
the existing material.
z You can play back tracks just recorded
If “TRACK” lights up in the display when recording has
finished, press · immediately to play back from the
first track of the material just recorded.
Notes
• You cannot record over the existing material when
“PROGRAM” or “SHUFFLE” appears in the display.
• You cannot change the recording mode setting during
recording or recording pause.
• You cannot operate the CD player section while the deck
is recording or standing by for recording with “OPT” or
“ANALOG” selected with the INPUT button.
Adjusting the Recording Level
You can adjust the recording level before starting
recording.
MENU/NO AMS
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
= +
0 )
r
P
·
p
1 / u
><
+
–
^
^
LEVEL
+
/
–
1 Do Steps 1 to 9 in “Recording on an MD
Manually” on page 19.
2 Play the portion of the sound source with the
strongest signal level.
3 Press MENU/NO twice to display “Setup Menu.”
4 Turn AMS to select the program source.
To select Turn AMS to display
CD player section of the deck CD
a component connected to the
DIGITAL OPTICAL IN connector
Opt
a component connected to the
LINE (ANALOG) IN jacks
Ain
5 Press AMS.