Filter
Top Products
Playing CDs and MDs
12
Number buttons
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control on
the deck, = and + buttons on the remote, or
number buttons on the remote.
When using the remote, set SELECT to CD or MD.
AMS
·
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
= +
0 )
r
P
·
p
1 / u
><
+
–
^
^
SELECT
>10
=/+
·
To locate Do the following:
z To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
z To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable MD only), or disc name (see page 11).
Locating a Particular Point in a
Track
You can also use the 0 and ) buttons to locate a
particular point in a track during playback or playback
pause.
When using the remote, set SELECT to CD or MD.
0/)
1/u
§§
0)
≠±≠±
r
pP
·
0)
pP
·
To locate a point Keep pressing
The next or succeeding
tracks
During playback, turn AMS clockwise
(or press + repeatedly) until you
find the track.
The beginning of the
current or preceding
tracks
During playback, turn AMS
counterclockwise (or press =
repeatedly) until you find the track.
A specific track
directly Z
Press number button(s) to enter the
track number.
A specific track by
using AMS
1 While the deck is stopped, turn
AMS until the track number you
want to locate appears.
2 Press AMS or ·.
z When you directly locate a track with a number over
10 Z
Press >10 before entering the corresponding digits.
Press >10 once if it is a 2-digit track number, and twice
if it is a 3-digit track number (for MD only).
To enter “0”, press button 10/0.
Examples: •To play track number 30
Press >10 once, then 3 and 10/0.
•To play track number 100
Press >10 twice, then 1, 10/0 and 10/0.
While monitoring the
sound
) (forward) or 0 (backward)
until you find the point.
Quickly by observing
the display during
playback pause
) or 0 until you find the point.
There is no sound output during this
operation.
z If “– Over –” appears while you are pressing )
The disc has reached to its end. Turn AMS
counterclockwise (or press =) or press 0 to go
back.
Notes
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the disc at normal speed.