Filter
Top Products
73
Turning off the beep
sound
You can turn off the beep sound in the
headphones/earphones.
On the recorder
1 Press the jog dial, turn the dial until
“OPTION” flashes in the display, and
then press the dial again.
2 Turn the jog dial until “BEEP”
flashes in the display and then press
the dial.
3 Turn the jog dial until “BEEP OFF”
flashes in the display, and then press
the dial.
On the remote control
1 Press DISPLAY for 2 seconds or
more.
2 Turn the control towards . or
N> until “OPTION” flashes in
the display, and then press x.
3 Turn the control towards . or
N> until “BEEP” flashes in the
display, and then press x.
4 Turn the control towards . or
N> until “BEEP OFF” flashes in
the display, and then press x.
To turn on the beep sound
Select “BEEP ON” in step 3 on the
recorder, and then press the jog dial.
Select “BEEP ON” in step 4 on the
remote control, and then press x.
Adjusting the contrast
of the display window
(Contrast adjustment)
You can adjust the contrast of the display
window on the recorder.
1 While the recorder is stopped, press
the jog dial, turn the dial until
“OPTION” flashes in the display, and
then press the dial again.
2 Turn the jog dial until “CONTRAST”
flashes in the display, and then press
the jog dial.
3 Turn the jog dial to adjust the
contrast, and then press the jog dial.
Note
You cannot adjust the contrast with the remote
control, nor can you adjust the contrast of the
display on the remote control.
Jog dial
DISPLAY
Control
x
Jog dial