Filter
Top Products
49
3 Turn the jog dial to adjust the sound
level.
Press x to move the cursor from “T”
to “B” (from the middle row to the
bottom row in the display) and press
X to move the cursor from “B” to “T”
(from the bottom row to the middle
row in the display).
To switch between “SOUND 1” to
“SOUND 2”, move the cursor to the
top row by pressing X while the
cursor is flashing on the “T” row, and
then turn the jog dial.
4 Press the jog dial.
The sound settings are saved and the
playback display appears again.
z
You can also use the . or > buttons to
adjust the sound level of “T” and “B” in step 3.
On the remote control
1 Press SOUND repeatedly to select
“SOUND 1” or “SOUND 2”.
2 During playback, press SOUND for 2
seconds or more.
The recorder changes to B (bass)
setting mode. Pressing the SOUND
button for 2 seconds again changes
the recorder back to T (treble) setting
mode.
3 Turn the control towards . or
N> repeatedly to adjust the bass
or the treble.
Pressing the SOUND button for 2
seconds or more toggles the display
between “SOUND 1” and “SOUND
2”. When you press SOUND for a
short time while adjusting B (bass) or
T (treble), the setting for that sound is
entered and the display switches to
the other sound setting.
4 Press x.
The sound settings are saved and the
playback display appears again.
To cancel the digital sound preset
• On the recorder
Select “SOUND OFF” in step 2.
• On the remote control
Press SOUND repeatedly until nothing
appears in the display.
SOUND 1
T-===== +
B-== ===+
-4 ±0+3
The cursor moves. (Position: +2)
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).
When you select bass-setting mode,
“B” appears. When you select treble-
setting mode, “T” appears.
Example: While adjusting the bass
The cursor moves.
(Position: –2)
–4±0+3
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).