Filter
Top Products
37
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
On the recorder
1 Press the jog dial, turn the dial until
“DISPLAY” flashes in the display,
and then press the dial.
2 Turn the jog dial until the information
you want flashes in the display.
The display changes as follows.
LapTime (The elapsed time of the
current track.)
r
RecRemain (The remaining time
after the current track in the
group.)
r
GP Remain (The remaining time
after the current track in a group.)
r
AllRemain (The remaining time
after the current track.)
r
Clock (Current time.)
Note
Items may not be selectable depending on the
group mode’s on/off status or the recorder’s
operating status.
3 Press the jog dial.
The display changes as follows.
Items in step 2 will appear in section
C in the display. If you select
“LapTime” in step 2, nothing will
appear on C in this step.
Display window on the recorder
Display A/B/C
Note
Items may appear differently depending on the
group mode’s on/off status, the recorder’s
operating status, or the recorder settings.
z
The display that appears on the remote control
is different from the ones on the recorder. See
“On the remote control” (page 38) to check the
display that appears on the remote control.
REC indicator
Jog dial
ABC
Track
number
Elapsed
time
—
(LapTime)
Track
number
Remaining
time for
recording
RecRemain
Numbers of
tracks after
the current
tracks in the
group
Remaining
time after
the current
location
within the
group
GP Remain
Numbers of
tracks after
the current
track
Remaining
time after
the current
location
AllRemain
Current date Current
time
Clock
A
B
C