Filter
Top Products
52
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played and then stopped.
On the recorder
1 While the recorder is playing, press
the jog dial, turn the dial until
“DISPLAY” flashes in the display,
and then press the dial again.
2 Turn the jog dial until the information
you want flashes in the display.
Each time you turn the dial, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
GP Remain (The remaining time
after the current location in the
group.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
Note
Items may appear differently depending on the
group mode’s on/off status or the recorder’s
operating status.
3 Press the jog dial.
The display changes as follows.
The item selected in step 2 appears in
section C in the display. However, if
you select “LapTime” in step 2,
section C remains blank.
Display window on the recorder
Indication A/B/C
Note
Items may not be selectable depending on the
group mode’s on/off status or the recorder’s
operating status.
z
The display that appears on the remote control
is different from the ones on the recorder. See
“On the remote control” (page 53) to check the
display that appears on the remote control.
Jog dial
AB C
Track
number
Elapsed time —
(LapTime)
Track
number
Remaining
time of the
current track
1 Remain
Number of
tracks after
the current
track in the
group
Remaining
time after the
current
location in the
group
GP
Remain
Number of
tracks after
the current
track
Remaining
time after the
current
location in the
group
AllRemain
Recorded
date
Recorded time RecDate
A
B
C