Filter
Top Products
53
On the remote control
1 Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Display window on the remote control
Indication D/E
Track number/Elapsed time
r
Track number/Track name
r
The number of tracks in the group/
Group name
r
The number of tracks in the disc/
Disc name
r
—/Recorded time
Note
Items may appear differently depending on the
group mode’s on/off status, the recorder’s
operating status, or the recorder settings.
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 38.
• The display that appears on the recorder is
different from the ones on the remote control.
See “On the recorder” (page 52) to check the
display that appears on the recorder.
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see “Optional accessories”
(page 88). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “AUDIO OUT” parameter for the
i/LINE OUT jack.
1 Press the jog dial, turn the dial until
“AUDIO OUT” flashes in the display,
and then press the dial again.
2 Turn the jog dial until “LINE OUT”
flashes in the display, and then press
the dial.
DISPLAY
D E
Portable DAT
recorder
Stereo system,
etc.
to LINE IN
2 phono plugs
L
(white)
Stereo mini-plug
R
(red)
RK-
G136
to i/LINE OUT
RK-
G129
Jog dial