Filter
Top Products
40
Copying CD text
information while
recording (Joint Text)
By connecting the recorder to a Sony
portable CD player that supports Joint
Text (the CD text copying function) (D-
E999, etc.), you can copy track and disc
names automatically during recording. In
addition to the CD text connecting cable
(RK-TXT1), make sure to connect the
recorder to the portable CD player with an
optical cable.
1 Press and slide REC to the right to
start recording on the recorder, and
start playing the CD in the portable
CD player.
“SYNC” and “REC” light up in the
display.
“CD TEXT” appears for a few
seconds, then “001 TEXT?” appears
and “PushENTER” flashes in the
display.
“NO TEXT” appears at this time if no
track name information exists in the
CD. In this case, the track name will
not be copied.
2 Press the jog dial.
Track name scrolls, and then the track
name appears and “PushENTER”
flashes in the display.
3 Press the jog dial.
Track name scrolls in the display
while the name is copied.
4 Follow steps 2 and 3 to copy each
new track name that appears.
5 Press x on the recorder at the point
you want to stop recording.
“000 TEXT?” appears and
“PushENTER” flashes in the display.
If you don’t want to copy the disc
name information, press x again. The
disc name is not copied and the
operation ends.
“NO TEXT” appears at this time if no
disc name information exists in the
CD. In this case, the operation ends
without copying the disc name.
6 Press the jog dial.
Disc name scrolls, and then disc name
appears and “PushENTER” flashes in
the display.
7 Press the jog dial.
“TOC Edit” flashes.
Afterwards, the disc name scrolls in
the display.
CD text connecting cable,
CD that support CD-TEXT,
and CD player that support
Joint Text required
Jog dial
To i/LINE OUT jack
x
REC
To LINE IN
(OPT) jack
RK-TXT1
(not
supplied)
Portable CD player
(D-E999, etc.)
To LINE OUT
(OPTICAL)
jack
POC-15B etc.
(not supplied)
To i/
REMOTE
jack