Filter
Top Products
62
Searching for a phrase by displaying
the stored phrase one by one
1 Follow steps 1 and 2 “On the remote
control” in “Labeling recordings”
(page 57), and then turn the control
towards . or N> until
“ :Name”, “GP : Name”, or
“ :Name” appears in the display.
Then press
x.
2 Press X repeatedly until the phrase
stored in the recorder’s memory
appears in the display.
3 Turn the control towards . or
N> repeatedly.
Turning the control causes the
phrases stored in the recorder’s
memory to appear one by one.
4 Press x slightly while the phrase you
want is shown in the display, and then
press
x for 2 seconds or more.
The cursor flashes after the phrase
you just retrieved.
Searching for a phrase by its first
letter of a phrase
1 When labeling a track, group, or disc,
turn the control towards . or
N> until the letter which the
desired phrase begins with flashes in
the display.
2 Press X to search so that the phrase
corresponding to the letter appears.
3 Turn the control towards N>until
the desired phrase flashes in the
display.
Turning the control causes all the
other phrases stored in the name bank
appear one by one.
After all the phrases have appeared,
the characters in the character palette
appear in the display one by one.
4 Press x while the phrase you want is
shown in the display, and then press
x for 2 seconds or more.
The cursor flashes after the phrase
you just retrieved.
Erasing phrases
1 While the recorder is stopped, press
DISPLAY for 2 seconds or more.
2 Turn the control towards . or
towards N> until “EDIT” flashes
in the display, and press
x.
3 Turn the control towards . or
towards N> repeatedly until
“BankErase” appears in the display,
and then press
x.
4 Turn the control towards . or
towards N> repeatedly until the
phrase you want to erase appears, and
then press
x.
“Erase!” appears in the display and
the phrase is erased.
To cancel the operation
Press DISPLAY for 2 seconds or more.