Filter
Top Products
70
Other operation
Suppressing the skips
of the sound
(G-PROTECTION)
The G-PROTECTION function was
developed to provide a higher level of
shock resistance than that of existing
players in order to allow the recorder to be
used while jogging.
Note
The playback sound may skip if:
• the recorder receives stronger continuous
shock.
• a dirty or scratched MiniDisc is played.
Using the alarm
(Melody Timer)
You can set the alarm timer to go off in 1
to 99 minutes and select three different
alarm sounds.
On the recorder
1 While the recorder is stopped,
playing, or play-paused, press the jog
dial.
2 Turn the jog dial until “M-TIMER”
flashes in the display, and press the
dial.
3 Turn the jog dial until “ON” flashes
in the display, and then press the dial.
, lights up in the display and the
alarm sound can be selected.
4 Turn the jog dial repeatedly to select
the alarm sound.
The following sounds can be selected.
5 Press the jog dial.
The alarm sound is set.
6 Turn the jog dial to select the elapsed
time.
One rotation of the control changes
the elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
keep turning the jog dial.
7 Press the jog dial.
Melody timer is set.
The time remaining until the alarm is
shown in the display while the
recorder is stopped or play-paused.
To check the time remaining
on the alarm while playing
Follow steps 1 to 3 again. The remaining
time and the selected sound appear in the
display.
To cancel setting the alarm
Press CANCEL.
Jog dial
Display Alarm sound
TIMER 1 Classical music 1
TIMER 2 Classical music 2
TIMER 3 Beeps
ON
TIMER 1
TIME:05
ON
TIMER 1
TIME:05