Filter
Top Products
56
GB
D COMPONENT VIDEO OUT
jacks
Use a video cord (not supplied) to connect a TV.
If your TV accept progressive format file
signals, you must use this connection and set the
“PROGRESSIVE” setting to “PROGRESSIVE
AUTO” or “PROGRESSIVE VIDEO”
(page 35).
E VIDEO OUT jack
Use a video cable (supplied) to connect the
video input of TV to this jack.
F S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
Use buttons on the unit for the operation.
1 Connect audio cords.
See “Hooking up optional components” on
page 55.
2 Press VIDEO/SAT to switch the
function to “VIDEO” or “SAT”.
3 Start playing the connected
component.
Notes
• If you cannot select “SAT”, by pressing VIDEO/
SAT, hold down VIDEO/SAT, then press
?/1 while
the power is on. The function will change from
“VIDEO” to “SAT”, and “SAT” will appear in the
display. To change back to “VIDEO”, repeat the
same procedure.
• If the sound is distorted or too loud when “VIDEO”
is selected or you want to switch back to “SAT”,
repeat the operation described above to switch to
“SAT”.
Listening to audio from a
connected component