Sony CMT-WS2D Stereo System User Manual


 
48
GB
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
90min t 80min t 70min tt 10min t
OFF
Other operations
Tip
You can use the Sleep Timer, even if you have not set
the clock.
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 11).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to
play.
DVD: Load a disc.
Tuner: Tune in the preset radio station
(see “Listening to the radio” on page 43).
2 Press VOLUME + or – to adjust the
volume.
3 Press TIMER MENU.
4 Press M or m repeatedly to select
“PLAY SET?”, then press ENTER.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Press M or m repeatedly to set the hour, then
press ,.
The minute indication flashes.
Press
M or m repeatedly to set the minute,
then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press M or m repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER.
The type of timer (“PLAY TIMER”), the
start time, the stop time, and the sound
source appear in turn, before the original
display returns.
9 Press ?/1 to turn off the system.
Timer
Falling asleep to music
— Sleep Timer
To Press
Check the
remaining time
SLEEP once.
Change the time
to turn off
SLEEP repeatedly to select the
time you want.
Cancel the Sleep
Timer function
SLEEP repeatedly until “SLEEP
OFF” appears.
Waking up to music
—Play Timer
TUNER
y
DVD PLAY