Filter
Top Products
42
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1 Press FUNCTION + or – repeatedly (or
press TUNER FM or TUNER AM on the
unit) to select “TUNER FM” or “TUNER
AM”.
2 Press and hold TUNING + or – until
“AUTO” appears.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for an FM
stereo program) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in “Manual tuning
preset”.
3 Press MENU.
“Memory?” appears.
4 Press ENTER.
A preset number flashes. Perform steps 5
and 6 while the preset number flashes.
5 Press M or m repeatedly to select the
desired preset number.
6 Press ENTER.
“Complete!” appears.
7 Repeat steps 1 through 6 to store other
stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1 Press FUNCTION + or – repeatedly (or
press TUNER FM or TUNER AM on the
unit) to select “TUNER FM” or “TUNER
AM”.
2 Press TUNING + or – repeatedly to tune
in the desired station.
3 Press MENU.
“Memory?” appears.
4 Press ENTER.
A preset number flashes. Perform steps 5
and 6 while the preset number flashes.
5 Press M or m repeatedly to select the
desired preset number.
6 Press ENTER.
“Complete!” appears.
7 Repeat steps 1 through 6 to store other
stations.
Other operations
Tuner
Presetting radio stations
STEREO TUNED MHz
Preset number
To Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”.
Set another station
to the existing
preset number
Start over from step 1. After
step 4, press M or m repeatedly
to select the preset number you
want to store the other station.
Cancel presetting Press MENU in step 3 or 4.