Filter
Top Products
Additional Information
61
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Tourist model: 76.0 – 108.0 MHz
Other models: 87.5 – 108.0 MHz
(50 kHz step)
Aerial FM lead aerial
Aerial terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
European model: 531 – 1,602 kHz
(with the interval set at 9 kHz)
Other models: 531 – 1,602 kHz
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
Aerial AM loop aerial
External aerial terminals
Intermediate frequency 450 kHz
Speaker (SS-CMD373)
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 13 cm dia., cone type
Tweeter: 2.5 cm dia., balanced drive type
Nominal impedance 6 ohms
General
Power requirements
European model: 230 V AC, 50/60 Hz
Other models: 110 – 120 V or 220 – 240 V
AC, 50/60 Hz
Power consumption 70 watts during normal operation
Approx. 3 watts in standby mode
(clock displayed)
Approx. 1 watt in standby mode
(clock not displayed)
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/MD/CD section:
Approx. 215 × 150 × 330 mm
Speaker: Approx. 170 × 275 × 235 mm
Mass
Amplifier/Tuner/MD/CD section:
Approx. 6.2 kg
Speakers: Approx. 3.5 kg net per speaker
Supplied accessories Remote (1)
R6 (size AA) batteries (2)
AM loop aerial (1)
FM lead aerial (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.
Parts descriptions for
the remote
You can use the supplied remote to control the
system.
Note
You cannot perform the following operations with the
remote;
— TUNING MODE setting for the tuner
— STEREO/MONO setting for the tuner
— Removing discs
— Recording on the MD
— One Touch Play
x
.
>
H
`/1
X
M
m
1
2
3
4
5
1 ?/1 (power) switch
2 CLOCK/TIMER SELECT button
Press to check timer settings, or to set the timer
on/off. (pages 49 and 51)
CLOCK/TIMER SET button
Press to set the clock and timer functions. (pages
6, 48, 50)
continued