Filter
Top Products
40
8 Press ENTER/YES if point A is correct.
“Point B Set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9 Continue playback until the deck
reaches point B, then press ENTER/
YES.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
10 Press . or > repeatedly to find
point B.
The procedure is the same as step 6.
11 Press ENTER/YES if point B is correct.
“Complete !!” appears for a few seconds and
the portion between point A and B is erased.
To cancel A-B Erase
Press MENU/NO.
Note
If “Impossible” appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
Moving recorded tracks
— Move Function
You can use this function to change the order of
any track on the disc. When you move tracks, the
tracks are automatically renumbered.
E.g.: Moving track 3 to position 2.
123
1
23
4
4
x
.
>
H
`/1
X
M
m
2 3,4,6
3,4,5
3,4,5
1
1 Press MD to switch the function to MD.
2 Press MENU/NO to display “Edit
Menu”.
3 Press . or > repeatedly until
“Move ?” appears, then press ENTER/
YES.
Track
number
Original
tracks
After
MOVE
Erasing recordings (continued)
AB C D
ACBD