Filter
Top Products
6
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
x
.
>
H
`/1
X
M
m
4,6
3,5
3,5
1
2
4
CURSORT
DISPLAY
1 Turn on the system.
2 Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
3 Press . or > to set the hour.
4 Press ENTER/YES or CURSORt.
The minute indication flashes.
5 Press . or > to set the minute.
6 Press ENTER/YES.
The clock starts.
If you make a mistake
Press CURSORT or t repeatedly until the
incorrect item flashes, then set it again.
To change the preset time
You can change the preset time while the system
is off.
1 Press DISPLAY to display the clock.
2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of “Setting the time”.
Tip
The upper dot of the colon flashes for the first 30
seconds, and the lower dot flashes for the last 30
seconds of each minute.