Filter
Top Products
5
Getting Started
3 Set the VOLTAGE SELECTOR on the
bottom of the system to the position of
your local power line voltage (for
models with a voltage selector).
220V
240V
110V
120V
VOLTAGE
SELECTOR
4 Connect the mains lead to a wall outlet.
If the plug of the mains lead does not fit your
wall outlet, attach the supplied adaptor on to
the plug (for models with a plug adaptor).
Inserting two R6 (size AA)
batteries into the remote
e
E
e
E
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes
• If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
• Be sure to insert the batteries in correct direction.
• Do not mix new batteries with old ones.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
and replace all the batteries with new ones.