Filter
Top Products
18
Using the CD display
You can check the remaining time on the current
track or on the CD. When a CD TEXT disc is
loaded, you can check the information recorded on
the disc, such as the titles or artist names.
x
.
>
H
X
M
m
DISPLAY
, Press DISPLAY.
Each time you press the button during
normal play or in stop mode, the display
changes as follows:
During normal play
t Elapsed playing time on the current track
x
Remaining time on the current track
x
Remaining time on the CD*
x
Track title of the current track**
x
Clock display
x
Effect name
To check the programme order
Press . or > repeatedly during Programme
Play.
To Do this
Cancel
Programme
Play
Press x, then press PLAY MODE
repeatedly until “PGM” and
“SHUFFLE” disappear.
Add a track to
the programme
(in stop mode)
Do steps 3 and 4.
Erase the entire
programme
Press x, when Programme Play is
in stop mode.
To select the desired track using
the remote
Press numeric buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10 and
the track number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press H.
• “Step Full” appears when you try to programme 26
or more tracks (steps).
• “--m--s” appears when the total CD programme
time exceeds 100 minutes, or when you select a CD
track whose number is 21 or over.
Programming CD tracks
(continued)