Filter
Top Products
60
Specifications
Main Unit (HCD-MD373)
Amplifier section
European model:
DIN power output (Rated):25 + 25 watts (6 ohms at 1 kHz,
DIN, 230 V)
Continuous RMS power output (Reference):
30 + 30 watts (6 ohms at 1 kHz,
10% THD, 230 V)
Music power output (Reference):
50 + 50 watts
Other models:
DIN power output (Rated):20 + 20 watts (6 ohms at 1 kHz,
DIN, 240 V)
18 + 18 watts (6 ohms at 1 kHz,
DIN, 220 V)
Continuous RMS power output (Reference):
25 + 25 watts (6 ohms at 1 kHz,
10% THD, 240 V)
23 + 23 watts (6 ohms at 1 kHz,
10% THD, 220 V)
Peak Music Power Output:400 watts
Inputs
TAPE IN (phono jacks): voltage 250 mV, impedance
47 kilohms
DIGITAL OPTICAL IN
LINE IN (stereo minijack):
voltage 250 mV, impedance
47 kilohms
Outputs
TAPE OUT (phono jacks):voltage 250 mV, impedance
1 kilohm
PHONES (stereo minijack):
accepts headphones of 8 ohms or
more.
SPEAKER: accepts impedance of 6 to 16
ohms.
CD player section
System Compact disc and digital audio
system
Laser Semiconductor laser (λ=780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with a
7 mm aperture.
Frequency response 2 Hz – 20 kHz
MD deck section
System MiniDisc digital audio system
Laser Semiconductor laser (λ=780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with a
7 mm aperture.
Sampling frequency 44.1 kHz
Frequency response 5 Hz – 20 kHz
Standby (flashing)
The timer settings have disappeared over time
and are not available for saving to disc, or
Program Play could not be activated since the
program has disappeared over time.
Text Protect
There is CD TEXT information which cannot
be recorded on the MD.
TOC Reading
The MD deck is reading the TOC information
of the MD.
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
Function.
TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
Name Full
There are already 50 disc titles stored in the
system.
—OVER—
You have reached the end of the CD while
keeping pressing MD/CD M> during
pause.
Self-diagnosis Display
(continued)