Filter
Top Products
12
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks.
• The track numbers of the CD are recorded on to the
MD automatically.
• Depending on the disc, CD TEXT information may
also be recorded. If “TEXT” flashes during
recording, press NAME EDIT, and then press
ENTER/YES to record the title of the current track.
(If “TEXT” is lit, it is automatically recorded.)
• You can adjust the recording level to the desired
volume after performing step 4 (see page 33).
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the mains lead
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” is flashing)
to ensure a complete recording.
If the MD becomes full during
recording
The CD player and the MD deck stop
automatically.
Note
If the MD is record protected, “C11” and “Protected”
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 25).
Playing an MD
To turn on the system, press ?/1 (power). You
can play an MD just like a CD.
z
.m >M
Z
x
Z
HS
x
`/1
HS
MD/CD
.m/M>
VOLUME
2
MD Z MD x
1 Insert an MD.
z
. m >M
2 Press MD HS.
Play starts. The H indicator on the
MD HS button lights green.
Track number Playing time
?/1 (power)
MD indicator
Recording a CD on an MD
(continued)
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side