Filter
Top Products
Other Features
47
8 Repeat steps 5 to 7 to complete the
entire title.
If you make a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
5 to 7.
To erase a character
Press CLEAR on the remote while the
character is flashing. You cannot insert
characters.
9 Press ENTER/YES on the remote to
complete the labelling procedure.
To cancel labelling
Press MENU/NO on the remote.
To check the Preset number and
frequency
The station name appears when you tuned the
labelled station.
To check the preset number and frequency, press
DISPLAY on the remote. The preset number and
frequency are displayed for 4 seconds and it
returns to the station name display.
To erase the name
1 Repeat steps 1 to 4.
2 Press CLEAR on the remote repeatedly to erase
the name.
3 Press ENTER/YES on the remote.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
programme signal. RDS is available only on FM
stations*.
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
, Simply select a station from the FM
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
Station name
Y
Frequency