Filter
Top Products
SPECIFICATIONS
Main unit CX-ZR525
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output*
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
16,2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
100 W+100W(50Hz-20kHz,
THD less than 1 %, 6 ohms)
“without
connected to the SURROUND
SPEAKERS
0.15 ‘Y.(50 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 210 mV (adjustable)
PHONO: 350 mV
MIC 1, MIC 2:2.4 mV (10 kohms)
CD DIGITAL OUT (OPTICAL)
SUPER WOOFER: 2.5 V
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accecpt speakers of 16 ohms or
more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
Type I (normal) tape:
50 Hz – 15000
HZ
Type II (high/CrOz) tape:
50
Hz – 16000 tiz
48 dB (high/CrOz tape)
AC bias
Deck 1: Recording/playback
head x 1
Erase head x 1
Deck 2: Playback head x 1
Compact disc player section
Laser
Semiconductorlaser(?L=780 nm)
D-A converter
1 bitdual
Signal-to-noise ratio
85
dB (1 kHz, OdB)
Harmonic distortion
0.03 % (1 kHz, O
dB)
Wow and flutter Unmeasurable
General
Power requirements
120V AC, 60 Hz
Power consumption
I15W
Dimensions of main unit
360 x 393x 382 mm
(W XHXD)
(14’/4X 15’/, x 15’/, in.)
Weight of main unit
9.2 kg (20 Ibs5 OZ)
Speaker system SX-ZR525
Cabinet type
3
way, bass reflex
Speakers
Woofer:
220 mm
(83/4in.) cone type
Tweeter:
60 mm
(23/8in.) cone type
Super tweeter:
20 mm (’3/03in.) ceramic type
Impedance
6
ohms
Output sound pressure level 89 dB/W/m
Dimensions (W x H x D)
260 x 444x 275 mm
(10’/4x 17’/, x 10’/8in.)
Weight
4.6
kg (10 Ibs 2 OZ)
Specifications and external appearance are subject to change without
notice.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radiollV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
2 I ENGLISH