Filter
Top Products
CONNECTING OPTIONAL
EQUIPMENT
CD DIGITAL OUT
(OPTICAL)
PHONO IN
VIDEO/AUX IN
SURROUND
SPEAKERS 4
SUPER WOOFER d
Refer to the operating instructions of the connected equipment
for details.
c The connecting cords are not supplied. Obtain the necessary
connecting cords.
. Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX IN JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(LD player, VCR, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
PHONO IN JACKS
Connect a turntable. Use an Aiwa turntable equipped with a built-
in equalizer amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (digital
amplifier, DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack, Then, connect an optical cable plug@ to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
SUPER WOOFER q JACK
Connect an optional powered sub woofer with a built-in amplifier
to the jack.
SURROUND SPEAKERS d JACKS
Connect the surround speakers to the SURROUND SPEAKERS
jacks. Connect the right speaker to the R jack, and the left
speaker to the L jack.
Standard positioning
Place the surround speakers behind the listening area. Refer to
the Operating Instructions of the surround speakers.
LISTENING TO EXTERNAL
SOURCES
To play equipment connected to the PHONO IN or VI DEO/AUX
IN jacks, proceed as follows.
1 Press the PHONO or VIDEO/AUX button.
PHONO or VIDEO appears on the display.
2 Play the connected equipment.
To change a source name in the display
When the VIDEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV.
With the power on, press the POWER button while pressing the
VIDEO/AUX button.
Repeat the procedure until the desired name appears on the
display.
To adjust the sound level of the external source
connected to VIDEO/AUX IN jack.
When the sound level of the external source is much higher or
lower than that of the other function sources, adjust it as follows.
1 Press the VIDEO/AUX button and play the equipment.
2 Press the M DOWN or ~ UP button to adjust the sound
level which is closest to the other function sources.
MIN(minimum), 1 to 6 and MAX(maximum) can be selected.
19 ENGLISH