Filter
Top Products
SETTING THE SLEEP TIMER BASIC OPERATION
1 .&).
000
00
em -
—2
Oow
000
‘..__. ./
\o
,,..___.-
‘\,,
~
/
I
I
/
‘i
The unit can be turned off automatically at a specified time.
Use the remote control.
1
Pressi the SLEEP button while pressing the SHIFT
button.
~?WithinA seconds, press the + or * button
to specify the time-until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
Specified time
L ● ——-l
3
10
Caoa
!
1
2,4
Preparation
● Connect the supplied stereo turntable to the main unit. (See
page 4)
● Set the EQUALIZER AMP. selector on the turntable to ON
position. (Refer to the operating instructions of the turntable
for details.)
1
2
3
4
Press the PHONO button on the main unit.
PHONO appears on the display.
Adjust the volume to minimum.
Turn the VOLUME control counterclockwise until “VOL O is
displayed.
❑
Play the turntable.
Refer to the operating instructions of the turntable for details.
Adjust the volume accordhtg to your preference.
l-o
check the time remaining until the power is turned off
Press the SLEEP button once while pressing the SHIFT button.
The remaining time is displayed for 4 seconds.
To cancel the sleep timer
F>ressthe SLEEP button twice while pressing the SHIFT button
so that “SLEEP on the display disappears.
ENGLISH 18