Filter
Top Products
To check the remaining time
During play, press the EDIT/CHECK button while pressing the
SHIFT button on the remote control. The amount of time
remaining until all tracks finish playing is displayed. To restore
the play time display, repeat the above again.
PROGRAMMED PLAY
discs.
m
● When loading an 8-cm (3-inch) disc, make sure to put it onto
the inner circle of the tray precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.
● Do not pli~ce more than one compact disc on one disc tray.
● Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
Up to 30 tracks can be programmed from any of the inserted
● When transporting the unit, remove the discs from the trays,
● When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
the AOPIEN/CLOSE button, “ERROR is displayed and the disc
compartment may not close. Remove the disc on that tray.
RANDOM /REPEAT PLAY
Use the retmote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT play
All the tracks on the selected disc or on all the discs can be
played repeatedly.
Press
the RANDOM/REPEAT button while pressing the
SHIFT button.
Each time they are pressed, the function can be selected
cyclically.
@ RANDOM play
@ REPEKf_ play
@ RANDOM/REPEAT play
~ Cancel
m
● Even if the *I button is Dressed dUrinCI RANDOM PlaY, a
previously played track can;ot be skipped~The unit returns to
the beginning of the current track only.
● Direct selection of the tracks with the numeric buttons is not
possible during RANDOM play.
Use the remote control.
1
2
3
Press the PRGM button twice while pressing the
SHIFT button in stop mode.
The PRGM indicator is displayed.
● When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAMS (page 16).
Press one of the DISC DIRECT PLAY buttons to
select a disc.
To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 button
while pressing the SHIFT button.
The selected disc is indicated in red on the display.
m
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +1 Oand Obuttons.
Selected track number
Total number of
selected tracks
Program r!umber
Total pl~ying time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press the - button to start play.
To check the program
Each time the + or * button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the ■ CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be
programmed after the last programmed track.
To change the programmed tracks
Clear the program and repeat all the steps again.
m
● RANDOM play is not performed during programmed play.
● During the programmed play, the EDIT/CHECK, DISC
CHANGE, DISC DIRECT PLAY and numeric buttons do not
function.
E/VGL/S/-/ 10