Sony BDV-IT1000ES Stereo System User Manual


 
33
US
Getting Started
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
•Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
BDV-IT1000ES
1 Decide the installation of the speakers.
Recommended example:
Position the front speakers so that their centers align with the TV. Position the center speaker so
that the center of the speaker and the TV are aligned.
The surround speakers should be placed as high (or a little higher) than the front speakers.
Ti
p
•For details about positioning the speakers, see “Step 2: Positioning the System” (page 28).
Installing the speakers on a wall
Center speaker
Front View
Front left speaker (L)
TV
Front right speaker (R)
Top View
Front left speaker (L)
Front right speaker (R)
TV