Sony BDV-IT1000ES Stereo System User Manual


 
Additional Information
135
US
Specifications
Amplifier Section
(HCD-IT1000ES)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC Output Power)
for the US model
Front L/Front R: With 3.5 ohms loads, both
channels driven, from 200
- 20,000 Hz; rated 50 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
Subwoofer: With 2 ohms loads, from
30 - 200 Hz; rated 75 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
Power output (rated) for the Canadian model
Front L/ Front R 80 W + 80 W
(at 3.5 ohms, 1 kHz, 1 %
THD)
RMS output power (reference)
Front L / Front R*: 100 W + 100 W
(at 3.5 ohms, 1 kHz, 10 %
THD)
Center*: 100 W
(at 3.5 ohms, 1 kHz, 10 %
THD)
Subwoofer*: 200 W
(at 2 ohms, 100 Hz, 10 %
THD)
* Depending on the decoding mode settings and the
source, there may be no sound output.
Amplifier Section
(HCD-IS1000)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC Output Power)
for the US model
Front L/Front R: With 10 ohms loads, both
channels driven, from 800
- 20,000 Hz; rated 35 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
Subwoofer: With 4 ohms loads, both
channels driven, from 30 -
800 Hz; rated 75 watts per
channel minimum RMS
power, with no more than
0.7% total harmonic
distortion from 250 milli
watts to rated output.
Power output (rated) for the Canadian model
Front L/ Front R 35 W + 35 W
(at 10 ohms, 1 kHz, 1 %
THD)
RMS output power (reference)
Front L / Front R*: 50 W + 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Center*: 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Subwoofer*: 100 W
(at 4 ohms, 70 Hz, 10 %
THD) + 100 W (at 4 ohms,
500 Hz, 10 % THD)
* Depending on the decoding mode settings and the
source, there may be no sound output.
Inputs (Analog)
TV, SAT/CABLE Sensitivity: 450 mV (ATT
ON), 250 mV (ATT OFF)
Impedance: 50 kilohms
Inputs (Digital/COAXIAL)
SAT/CABLE, TV Impedance: 75 ohms
Video Section
Outputs VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
Inputs VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI section
Connector HDMI 19pin-standard
connector
Video inputs HDMI1, HDMI2:
640 × 480p@60 Hz
720 × 480i@59.94/60 Hz