Filter
Top Products
Settings and Adjustments
115
US
x[BD-ROM 1080/24p Output]
You can set to output 1920 × 1080p/24 Hz video
signals when playing film-based materials on
BD-ROMs (720p/24 Hz or 1080p/24 Hz).
1920 × 1080p/24 Hz video signals can be output
when all of the following conditions are met.
– You connect a 1080/24p-compatible TV
using the HDMI OUT jack,
– [Output Video Format] is set to [HDMI], and
– [HDMI Resolution] is set to [Auto] or
[1080p].
The 24P indicator lights up when outputting
1920
× 1080p/24 Hz video signals.
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[On]: Outputs 1920 × 1080p/24 Hz video
signals regardless of the connected TV type.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
Note
• Video signals may not be output when [BD-ROM
1080/24p Output] is set to [On].
x[YCbCr/RGB]
You can set the color setting for video signals
output from the HDMI OUT jack. Select the
setting that matches the connected TV type.
[Auto]: Automatically detects the type of
external device, and switches to the matching
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB (16-235)]: Select this when connecting to
a device with an HDCP-compliant DVI jack.
[RGB (0-255)]: Select this when connecting to
an RGB (0-255) device.
x[x.v.Color Output]
Sets whether to send xvYCC information to the
connected TV.
Combining xvYCC-compatible video with a TV
that supports x.v.Color display makes it possible
to more accurately reproduce object colors
present in the natural world.
[Auto]
: Normally select this.
[Off]: Select this when the picture is unstable or
colors appear unnatural.
x[Audio (HDMI)]
You can set the output type for the audio signal
from the HDMI OUT jack.
[AMP]
: HDMI audio signals are output to the
system speakers only. The multi-channel sound
can be played back as it is.
[TV+AMP]: HDMI audio signals are output
from the TV’s speaker and the system’s
speakers.
Note
• If you set to [TV+AMP], the sound quality of the
system depends on the TV's sound quality, such as the
number of channels, the sampling frequency, etc.
When the TV has stereo speakers, the sound output
from the system’s speakers is also stereo as that of the
TV, even if you play multi-channel source.
• When you connect the system to a video component
(projector, etc.), sound may not be output from the
system. In this case, select [AMP].
• When the System Audio Control function (page 97)
is activated, this setting may change automatically.