Sony BDV-IT1000ES Stereo System User Manual


 
94
US
To cancel pairing
Perform the ID setting of the unit according to
the procedure of “To set the ID of the unit”
(page 89). If you select a new ID (you can select
the same ID as before), pairing is canceled.
If you use multiple wireless systems which
sharing the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following [S-AIR RF
Change] setting.
1 Press HOME.
The home menu appears on the TV screen.
2 Press C/c to select [Setup].
3 Press X/x to select [System Settings],
then press .
4 Press X/x to select [S-AIR RF Change],
then press .
5 Press X/x to select the desired setting.
•[Auto]: Normally select this. The system
changes the setting to [On] or [Off]
automatically.
[On]: The system transmits sound by
searching the better channel for
transmitting.
[Off]: The system transmits sound by
fixing the channel for transmitting.
6 Press .
The setting is made.
7 When you set to [Off], select the ID so
that sound transmission is most
stabilized (page 89).
Note
•In most cases, you will not need to change this
setting.
• If [S-AIR RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
S-AIR ID A: equivalent channel for Wi-Fi
channel 1
S-AIR ID B: equivalent channel for Wi-Fi
channel 6
S-AIR ID C: equivalent channel for Wi-Fi
channel 11
•The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
If sound transmission is
unstable
For the surround amplifier
For the S-AIR receiver