Sony BDV-IT1000ES Stereo System User Manual


 
29
US
Getting Started
About the surround back speaker
You can enjoy 7.1 surround sound with the surround back speakers by purchasing the additional
surround amplifier (optional). Use the commercially available speakers for the surround back speakers.
To use the surround amplifier for the surround back speakers, connect the surround back speakers (not
supplied) to the surround amplifier, see “Using an S-AIR Product” (page 89).
Note
•Avoid placing obstructions around the speaker.
•After installing the speakers, arrange the speaker cords so as not to topple the speakers by catching the speaker cords
with your foot.
• Avoid placing the center speaker on the TV.
•Do not set the speakers in an inclined position.
•Avoid placing the speakers in locations that are:
Extremely hot or cold
Dusty or dirty
Very humid
Subject to vibrations
Subject to direct sunlight
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
•Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
•Do not lean or hang on the speaker, as the speaker may fall down.
•Do not bend, twist, or fold the speaker grille. (BDV-IT1000ES only)
•Do not insert an object (especially metal) into a hole on the front part of the speaker. (BDV-IT1000ES only)
•Avoid placing the speakers close to a CRT-based TV. It may cause color irregularity. (BDV-IT1000ES only)
• When using the optional stand, we recommend that the speakers are installed on a flat and firm floor (not on a thick
pile carpet, for example). The speakers may topple over if installed on an inclined or soft floor.
Ti
p
•When you change the positions of the speakers, Sony recommends that you change the settings. For details, see
“Calibrating the Appropriate Settings Automatically” (page 98) and “Setting the Speakers” (page 100).