Filter
Top Products
29
• Press
A
on your remote control or
AUTO
on keypad to execute
automatic adjustments.
• Adjust the horizontal and vertical position of projected image
by selecting
POSITION
on the
IMAGE ADJUSTMENTS
menu.
• Adjust the width and height of image, selecting
ASPECT
in the
IMAGE ADJUSTMENTS
menu.
• Adjust the Overscan value in the
IMAGE/OVERSCAN
menu.
Image too dark, too pale or unnaturally coloured
• Verify compatibility of video/graphic signals with technical
specifications of your projector.
• Go to
PICTURE
menu, select and regulate any of the following,
accordingly:
CONTRAST, BRIGHTNESS, COLOR,
and
TINT
.
• If necessary, reset the
COLOR TEMPERATURE
and
GAMMA COR-
RECTION
(found on the
IMAGE ADJUSTMENTS / ADVANCED SETTINGS
menu).
Graphic image with poor quality vertical detail
• Verify compatibility of video/graphic signals with technical
specifications of your projector.
• Press A on your remote control or AUTO on keypad to exe-
cute automatic adjustments.
You can purchase the following optional accessories at your
Dealer:
- Ceiling Bracket Kit.
- Type of lens
Up to six types of lenses are available to accommodate different
throw distances and your specific installations. See
ADDITIO-
NAL INFORMATION for more details on throw distances and
the dimensions of the image projected. To change the lens,
contact always your nearest dealer.
11 OPTIONAL ACCESSORIES
Use only original, or SIM2 Multimedia approved, accessories.
CAUTION: for ceiling installation, by means of su
-
spension bracket, carefully follow the instructions
and safety instructions recommended by the Manu
-
facturer in the bracket’s literature.
• Adjust
FREQUENCY
and
PHASE
parameters, found in the
IMAGE ADJUSTMENTS
menu, to optimise vertical detail of the
projected image.
Video Image showing colour misalignment on ver
-
tical details
• Verify compatibility of video/graphic signals with technical
specifications of your projector.
• Adjust
Y/C DELAY
settings in the
IMAGE ADJUSTMENTS / ADVANCED
SETTINGS
to reduce colour misalignment. For best results use
an external colour bar test pattern source.
Remote control does not work
• Check the batteries and for correct polarity.
• Ensure that the area between the infrared sensor (front of
projector) and the remote control is free of obstruction.
• Ensure that infrared sensors (front and rear of projector) are
not exposed to intense light levels.