Filter
Top Products
22
POSITION
Use this adjustment to position the image vertically and ho-
rizontally. Determines the aspect ratio of the projected image.
These parameters do not normally require adjustment because
the system checks the input signal and automatically sets the
most suitable values.
However, if the image is not perfectly centralised it may prove
useful to request the system to repeat the input signal analysis
and image positioning, calling the automatic control procedure
from the
AUTO
button on the remote control or keypad. When this
procedure is called it is helpful to have a white or light coloured
background on the screen in the current picture.
FREQUENCY/PHASE
These adjustments, available for progressive signals and for
signals from PC, ensure correspondence between the number
of pixels making up the signal and the number of pixels making
up the projected image.
These parameters do not normally require adjustment because
the system checks the input signal and automatically sets the
most suitable values.
However, if the image appears disturbed (loss of position within
the equidistant vertical bands or instability and lack of shar
-
pness on the narrow vertical lines) it may help to prompt the
system to repeat the input signal analysis and determination
of the best parameters by calling the automatic adjustment
procedure with the
AUTO
key on the remote control or on the
keypad.
If the automatic procedure fails to have the required effect, enter
the frequency and phase values manually and approach the
screen sufficiently to observe the effects of the adjustments.
Y / C DELAY
In the case of Video and S-Video signals, it may be necessary
to correct horizontal colour misalignment within the projected
image. For a given video standard (e.g. PAL or NTSC) the stored
value does not normally require further fine-tuning, unless the
source or connection cable has changed.
Table 5
SETUP
The setup menu contains less frequently used adjustments that
may be required during installation (e.g. On Screen Display
language selection or the display of Test Patterns).
ORIENTATION
Select the option that best describes the installation i.e. desktop
front, ceiling front, desktop rear and ceiling rear.
1
2
3
-
C
L
A
S
S
1
L
A
S
E
R
P
R
O
D
U
C
T
5
0
0
L
I
N
K
Fig. 21
Position
As
pect
Video
S- Vide
o
RGB S
YCrCb
RGB G rafico
RGB S 15kHz
YCrCb
15kHz
Adjustments
In
puts
Freq
uency
-
-
Phas
e
Gamma Correction
Colour Temperature
Y/C Dela
y
-
-
-
-
-
-
-
-
Overscan
-
DVI-D
HDMI™