Filter
Top Products
18
Inputs
1 VIDEO 1
2 VIDEO 2
3 S- VIDEO 3
4 S- VIDEO 4
5 C
OMP/RGB 5
6 C
OMP/RGB 6
7 COMP/RGB 7
8
COMP/RGB 8
9 GRAPH RGB 9
10 GRAPH RGB
10
11 DVI-D 11
12 HDMI 12
1
2
3
4
5 YCrCb 32kHz
6
RGB S 15kHz
7 YCrCb
8 YCrCb 15kHz
9
10
11 YCrCb
12
Inputs
1
2
3
4
5 YCrCb
32kHz
6
RGB S 15kHz
7 YCrC
b
8 YCrCb
15kHz
9
10
11 YCrCb
12
YCrC b AutoSync
YCrCb 15KH
z
YCrC
b
RGB Auto
S ync
RGB 15Khz
RGB
1 VIDEO 1
2 VIDEO 2
3 S- VIDEO 3
4 S- VIDEO 4
5 C
OMP/RGB 5
6 C
OMP/RGB 6
7 COMP/RGB 7
8
COMP/RGB 8
9 GRAPH RGB 9
10 GRAPH RGB
10
11
DVI-D 11
12 HDMI 12
Fig. 18a
Fig. 18b
8 ON SCREEN MENU
In the pull-down menu it is also possible to choose the hori-
zontal frequency or use the AutoSync feature; in this case the
system detect the horizontal frequency signal (15KHz, 32KHz
or higher) automatically.
Input 11 is capable of receiving YCrCb or RGB signals coming
from DVI-D sources.
The selection should be made from the drop menu following
the indications described above.
After selecting the source signal (by means of the
· and ‚
keys), press
MENU+/MENU-
to confirm and close the pull-down
menu; the value you have just set will be displayed on the right
of the < symbol.
As with the other inputs, you can now select the input just set
by pressing the
‡ key.
During the short time it takes to find the signal, a box appears
showing the signal requested. As soon as the signal is shown
in the box additional information is displayed concerning the
video standard (for video signals) or resolution (for graphic
signals), and format.
Fom the
SETUP
menu it is possible to choose to visualize or not
this information, for more details check the
SOURCE INFORMATION
in
MENU
section.
INPUTS
The input selection menu (Inputs) is called by pressing 0 on the
remote control and, when no other menu is displayed, using
the · and ‚ keys on the keypad. To select an input, scroll the
list with the
· and ‚ keys until the desired input is highlighted,
then press ‡.
Display of the input selection menu is terminated
by pressing the ESC key, or when the time allowed for displaying
the on-screen menu has lapsed (set in the Set-up Menu).
Input 5 can accept RGB and YCrCb signals with a scan fre-
quency up to 32Khz.
Inputs 6, 7 and 8 can receive RGB and YCrCb signals, at 15
kHz, 32 kHz or higher. The association between the input and
the type of signal (RGB or YCrCb) is made from the pull-down
menu that appears on the right of the < symbol after pressing
the fl key (Fig. 18b).
All system functions can be activated from the keypad or remote control with the aid of a practical and comprehensive system
of on screen menus.