Filter
Top Products
ENGLISH
38
DIGITAL AUDIO RECORDING WITH MD RECORDER
For digital recording, select the desired
digital input as recording signal input.
2
Select a desired input of CD, AUX and
VIDEO 1~VIDEO 6 as a recording source.
1
Start recording on the component
connected to OPTICAL or COAXIAL
DIGITAL OUT.
3
• Only when the OPTICAL or COAXIAL DIGITAL OUT of this unit is connected to the OPTICAL or COAXIAL DIGITAL IN of the
MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals.
Refer to “CONNECTING AUDIO COMPONENTS” and “CONNECTING DIGITAL INs and OUTs” on page 6 and 8 and the
operating instructions of the MD recorder or CD recorder.
• However, when the COAXIAL DIGITAL OUT is connected to the component installed in another room for ROOM 2 playback,
the digital signals from the COAXIAL DIGITAL OUT will be used for ROOM 2 playback.
• In this case that the COAXIAL DIGITAL OUT is connected to the MD recorder or CD recorder for digital recording, be sure to
deactivate the ROOM 2 function.
Notes:
• The digital signals being input into the USB terminal will not be output from the COAXIAL DIGITAL OUT.
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
or
STANDBY
POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
Start play on the desired input.
4
• Each time this button is pressed, the corresponding
input is selected as follows:
DIGITAL ANALOG
Note : When the selected digital input is not
connected, “DIGITAL” is flickering,
meaning no recording as well as no sound.
or
STANDBY
POWER ON
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
Start recording on the component
connected to VIDEO 1.
3
Start play on the components connected to
VIDEO 2 and CD respectively.
4
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can enjoy
them on the TV set and from the speakers.
• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
connected to video recording component such as video
deck, etc., in the same manner, recording with VIDEO
2 can be performed.
(If this is the case, be sure to deactivate the ROOM 2
function and to set the VIDEO 2 OUT to On. For
details, refer to “When selecting the VIDEO 2 OUT”
on page 55.)