ENGLISH
Repeat the above steps to to
memorize other stations.
4
• When using the NUMERIC buttons on the remote
control.
Examples) For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is
stored automatically without pressing the
(ENTER/)MEMORY button.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If “MEMORY” goes off, start again from the above
step
.
MEMORY BACKUP FUNCTION
The following items, set before the unit is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations, etc.
• When using the NUMERIC buttons on the remote
control.
Examples) For “3”:
For “15”:
For “30”:
Select the desired preset number (1~30) and press the (ENTER/)MEMORY button.
3
STANDBY
POWER ON
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
STANDBY
POWER ON
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
+
• After selecting the tuner as input source, select the desired preset number.
Tuning to preset stations
STANDBY
POWER ON
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
+
or
within 2 seconds
3
1 5
0
within 2 seconds
3
1 5
0
35
• You can store up to 30 preferred stations in the
memory.
• “MEMORY” is flickering for several seconds.
Manual presetting
Tune in the desired station with auto or
manual tuning.
1
Press the (ENTER/) MEMORY button.
2
or
STANDBY
POWER ON
AUD2
SCH,M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
Note
• When performing manual presetting with the remote
control, first be sure to turn off the OSD menu
display.