Sherwood P-965 Stereo Amplifier User Manual


 
ENGLISH
12
9. CONNECTING MULTI-ROOM SYSTEM KIT
The multi-room system kit(sold separately ) is essential for operation from a remote location .
For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.
IR IN jack allow you to control this unit from another room with the remote control unit.
To control this unit from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.
If this unit is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter,
then operation with the remote control unit will not be possible. In such a case, connect the IR IN jack to the output of the
connecting block.
To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to
the IR emitter.
Note:
Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted
fluorescent.
Connecting block
(Multi-room system kit)
output
Another room(Room 2)
This unit
Main room
DVD player
In the cabinet
MULMULTI CONTROLTI CONTROL
MASTER VOLUMEMASTER VOLUME
POWER
STANDBY DECODING STEREO DIGITAL/ANALOGPURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT
ON/OFF
INPUT SELECTOR
IR receiver
(Multi-room system kit)
Connecting block
(Multi-room system kit)
output
This unit
MULMULTI CONTROLTI CONTROL
MASTER VOLUMEMASTER VOLUME
POWER
STANDBY DECODING STEREO DIGITAL/ANALOGPURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT
ON/OFF
INPUT SELECTOR
IR receiver
(Multi-room system kit)
IR emitter
(Multi-room system kit)
RNC-500
When this unit is located inside a cabinet.
VIDEO 6
ROOM2
PHONO TUNERCD
AUX
VIDEO 1 VIDEO 3VIDEO 2
VOLUME
MUTE
VIDEO 4VIDEO 5
VIDEO
AUDIO
Microphone
10. CONNECTING MICROPHONE
To use Auto Speaker Setup function, connect the
supplied microphone to the SETUP MIC jack.(For details,
refer to When selecting the AUTO SPEAKER SETUP
on page 49.)
Notes:
Because the microphone for Auto Speaker Setup is
designed for use with this receiver, do not use a
microphone other than the one supplied with this unit.
After you have completed the auto speaker setup
procedure, disconnect the microphone.